Application Guidelines [full details of each Space type]
SPACE A (Sales Stand)
* 5 units maximum per Exhibitor
SHELL SCHEME
SPACE A IS EXCLUSIVE FOR THE SALE OF CAR-RELATED PRODUCTS, MERCHANDISE AND
ACCESSORIES.
(No combination bookings of Space A with any other Space types accepted.)
* No demonstrations whatsoever are allowed in Space A including autograph session, photo session, questionnaire survey or lottery event. TASA deserves the right to halt such violating acts immediately upon detection.
* All your products, fixing or decor shall be kept within your own stand. Any decor on the fascia (including flags and banners) must not exceed a height of 2.7 metres.
* Vehicles are not allowed to go on display in Space A.
Stand Size3m width × 2m depth
Height Limit2.7m
[Standard Layout]
ONE UNIT
▪IN-LINE STAND
▪CORNER STAND
* In corner stands, the aisle-facing side will be a fascia
in place of a side wall (open on 2-side).
Space A (1 unit)consists of:
Back and side walls | finished in white coated paper |
Fascia | 300mm in height |
1 × Nameboard | Kaku Gothic in black by default |
1 × LED light | 21W |
1 × Two-socket outlet | 100V/0.5KW |
* Primary distribution of 0.5KW and electricity charges during the course of the show also included in this package. |
TWO LINKING UNITS
* A fascia-support pillar and a ceiling beam will be installed in between units.
* For one to three units, one outlet will be provided.
* For four to five units, two outlets will be provided.
No divider wall between units is installed in any linking units. Though, for structural reasons, base panel(s) and pillar(s) will be installed in between units.
Space A (2 linking units) consists of:
Back and side walls | finished in white coated paper |
Fascia | 300mm in height |
1 × Nameboard | Kaku Gothic in black by default |
2 × LED light | 2 ×21W |
1 × Two-socket outlet | 100V/1.0KW |
* Primary distribution of 1.0KW and electricity charges during the course of the show also included in this package. |
NOTES & CONDITIONS
① The default font used on the TASA-provided nameboard is Kaku Gothic. You may make arrangements for your own nameboard in particular font, colour and/or logo at your own expense. To do so, you are required to appoint your own contractor and register it with us by completing the form attached on the Exhibitor’s Guidelines.
default font sample:
②
No part of the TASA-provided fixtures, including the back wall, can be removed. Corner stands
MUST NOT put up a wall to block off the side aisle. If you have need to customize your stand,
you may remove the fascia (with a few exceptions for structural reasons). To do so, you are
required to appoint your own contractor and register it with us by completing the form attached
to the Exhibitor’s Guidelines. Removal of the fascia results in the removal of the nameboard and
fluorescent light as well. If you need your own electric work by appointing your own contractor,
TASA will provide you with the primary installation of a cable only but no outlet.
③
Floors are finished in bare concrete. No carpet is included in this package. It should be
ordered separately at extra charge. To do so, you are required to appoint your own contractor
and register it with us by completing the form attached on the Exhibitor’s Guidelines
④ Whenever you use nails, screws or whatever is necessary to fasten/join in, take care not to project them into the gangways/aisles or any neighbouring stands.
⑤ No heavy objects can be hung from the fascia.
* Space assignments will be made by TASA.
SPACE A PRICES
Member: ¥308,000 (tax included) per unit
Associate: ¥363,000 (tax included) per unit