Application Guidelines [full details of each Space type]
SPACE C (Display Stand)
* 5 units maximum per Exhibitor
SPACE C IS A 'SHELL SCHEME' STAND.
Stand Size3m width × 3m depth
Height Limit2.7m
[Standard Layout]
ONE UNIT
▪IN-LINE STAND
▪CORNER STAND
* In corner stands, the aisle-facing side will be a fascia in place of a side wall (open on 2-side).
* The side of the stand must not be covered wholly with a wall.
It must leave open at least 1/2 (except the island stand).
Space C (1 unit) consists of:
Back and side walls | finished in white coated paper |
Fascia | 300mm in height |
1 × Nameboard | Kaku Gothic in black by default |
1 × LED light | 21W |
1 × Two-socket outlet | 100V/0.5KW |
* Primary distribution of 0.5KW and electricity charges during the course of the show also included in this package. |
TWO LINKING UNITS
* A fascia-support pillar and a ceiling beam will be installed in between units.
* For one to three units, one outlet will be provided.
* For four to five units, two outlets will be provided.
No divider wall between units is installed in any linking units. Though, for structural reasons, base panel(s) and pillar(s) are installed.
Space C (2 linking units) consists of:
Back and side walls | finished in white coated paper |
Fascia | 300mm in height |
1 × Nameboard | Kaku Gothic in black by default |
2 × LED light | 2 x21W |
1 × Two-socket outlet | 100V/1.0KW |
* Primary distribution of 1.0KW cable and electricity charges during the course of the show also included in this package. |
NOTES & CONDITIONS
①
The default font used on the TASA-provided nameboard is Kaku Gothic. You may make arrangements
for your own nameboard in particular font, colour and/or logo at your own expense. To do so, you
are required to appoint your own
contractor and register it with us by completing the form attached to the Exhibitor's
Guidelines.
default font sample:
②
No part of the TASA-provided fixtures, including the back wall, can be removed. If you, however,
have need to customize your stand, you may remove the fascia (with a few exceptions for
structural reasons). To do so, you are required to appoint your own contractor and register it
with us by completing the form attached to the Exhibitor's Guidelines. Please note that the
removal of the fascia results in the removal of the nameboard and fluorescent light as well. If you need your own
electric work by appointing your own contractor, TASA will provide you with the primary installation of a cable only but no outlet.
③
Floors are finished in bare concrete. No carpet is included in this package. It should be
ordered separately at extra charge. To do so, you are required to appoint your own contractor
and register it with us by completing the form attached on the Exhibitor's Guidelines.
④ Whenever you use nails, screws or whatever necessary to fasten/join in, take care not to project them into the gangways/aisles or any neighbouring stands.
⑤ No heavy objects can be hung from the fascia.
⑥ No decor can be added to the outer walls.
• Space assignments will be made by TASA.
SPACE C PRICES
Member: ¥308,000 (tax included) per unit
Associate: ¥363,000 (tax included) per unit